AGC Multi Material America, Inc.

Production Associate - 2nd Shift

TEMPE, AZ
Full Time
Entry Level
POSITION SUMMARY
Lay-Up operators are responsible for the Prepreg and B-Sales sheeting operation on the Rosenthal Sheeter in addition to laying up Prepreg layers for the purpose of constructing copper clad or unclad laminates. Ensure proper identification of material and filling out the manufacturing Lot Traveler. Operation of the Techno-isel Drill Machine for the purpose of tooling B-Sales. Utilize the vacuum heat sealer for B-Sales orders. Enter completed jobs into our Oracle database. Lay-Up operators are also responsible in following the method spelled out in our MOP for cleaning all white rooms and associated equipment.

ESSENTIAL FUNCTIONS
  • Maintain equipment in good working order.
  • Maintain clean room supplies & clean rooms.
  • Maintain traceability on all materials.
  • Maintain productivity records and housekeeping check lists.
  • Interpret data to determine basic construction of semi-finished board taken from traveler and record lot numbers.
  • Assemble lot determined by data on traveler.
  • Visual inspection of pre-Preg for inclusions or discoloration before lay-up.
  • Ensure correct lot information is recorded on travelers and accurate data entry into ORACLE.
  • Labeling & bagging of B-Sales.
  • Drilling/Tooling B-Sales.
  • Follow all MOPS.
  • Operator will be cross trained in other departments and used as needed in those predetermined areas as needed based on business demand.
  • All other duties as assigned.

QUALIFICATIONS
  • High school diploma or GED required.
  • Ability to follow written and verbal instructions.
  • Basic mechanical aptitude and attention to detail.
  • Forklift experience or ability to obtain certification preferred.
  • Ability to read, write, and communicate effectively in English is required.

SAFETY REQUIREMENTS
  • Must follow all OSHA standards and company safety procedures.
  • Required to wear appropriate personal protective equipment based on job function and training.

PHYSICIAL/ENVIRONMENTAL REQUIREMENTS
The physical and environmental demands described here are representative of those required to perform the essential functions of this job safely and effectively. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions.
  • May be exposed to varying weather conditions.
  • Ability to stand, walk, and sit for extended periods.
  • Use of hands to handle, feel, and grasp tools and materials.
  • Reach and lift with hands and arms.
  • Lift, move, and carry objects up to 25 pounds.
  • Ability to climb stairs, balance, stoop, kneel, and crouch.
  • Ability to talk and hear clearly for safety on the production floor.
  • Visual ability including close vision, distance vision, color vision, peripheral vision, depth perception, and the ability to adjust focus as needed.

BENEFITS
  • We offer full benefits the 1st of the month following 30 days of employment.  
  • Weekly pay
  • $1.00 shift differential for 2nd shift

EQUAL EMPLOYMENT OPPORTUNITY
AGC Multi Material America, Inc. is an Equal Employment Opportunity/Affirmative Action/Veteran/Disability Employer.
Share

Apply for this position

Required*
We've received your resume. Click here to update it.
Attach resume or Paste resume
Attach resume as .pdf, .doc, .docx, .odt, .txt, or .rtf (limit 5MB) or Paste resume

Paste your resume here or Attach resume file

To comply with government Equal Employment Opportunity and/or Affirmative Action reporting regulations, we are requesting (but NOT requiring) that you enter this personal data. This information will not be used in connection with any employment decisions, and will be used solely as permitted by state and federal law. Your voluntary cooperation would be appreciated. Learn more.
Invitation for Job Applicants to Self-Identify as a U.S. Veteran
  • A “disabled veteran” is one of the following:
    • a veteran of the U.S. military, ground, naval or air service who is entitled to compensation (or who but for the receipt of military retired pay would be entitled to compensation) under laws administered by the Secretary of Veterans Affairs; or
    • a person who was discharged or released from active duty because of a service-connected disability.
  • A “recently separated veteran” means any veteran during the three-year period beginning on the date of such veteran's discharge or release from active duty in the U.S. military, ground, naval, or air service.
  • An “active duty wartime or campaign badge veteran” means a veteran who served on active duty in the U.S. military, ground, naval or air service during a war, or in a campaign or expedition for which a campaign badge has been authorized under the laws administered by the Department of Defense.
  • An “Armed forces service medal veteran” means a veteran who, while serving on active duty in the U.S. military, ground, naval or air service, participated in a United States military operation for which an Armed Forces service medal was awarded pursuant to Executive Order 12985.
Veteran status


Voluntary Self-Identification of Disability
Voluntary Self-Identification of Disability Form CC-305
OMB Control Number 1250-0005
Expires 04/30/2026
Why are you being asked to complete this form?

We are a federal contractor or subcontractor. The law requires us to provide equal employment opportunity to qualified people with disabilities. We have a goal of having at least 7% of our workers as people with disabilities. The law says we must measure our progress towards this goal. To do this, we must ask applicants and employees if they have a disability or have ever had one. People can become disabled, so we need to ask this question at least every five years.

Completing this form is voluntary, and we hope that you will choose to do so. Your answer is confidential. No one who makes hiring decisions will see it. Your decision to complete the form and your answer will not harm you in any way. If you want to learn more about the law or this form, visit the U.S. Department of Labor’s Office of Federal Contract Compliance Programs (OFCCP) website at www.dol.gov/ofccp.

How do you know if you have a disability?

A disability is a condition that substantially limits one or more of your “major life activities.” If you have or have ever had such a condition, you are a person with a disability. Disabilities include, but are not limited to:

  • Alcohol or other substance use disorder (not currently using drugs illegally)
  • Autoimmune disorder, for example, lupus, fibromyalgia, rheumatoid arthritis, HIV/AIDS
  • Blind or low vision
  • Cancer (past or present)
  • Cardiovascular or heart disease
  • Celiac disease
  • Cerebral palsy
  • Deaf or serious difficulty hearing
  • Diabetes
  • Disfigurement, for example, disfigurement caused by burns, wounds, accidents, or congenital disorders
  • Epilepsy or other seizure disorder
  • Gastrointestinal disorders, for example, Crohn's Disease, irritable bowel syndrome
  • Intellectual or developmental disability
  • Mental health conditions, for example, depression, bipolar disorder, anxiety disorder, schizophrenia, PTSD
  • Missing limbs or partially missing limbs
  • Mobility impairment, benefiting from the use of a wheelchair, scooter, walker, leg brace(s) and/or other supports
  • Nervous system condition, for example, migraine headaches, Parkinson’s disease, multiple sclerosis (MS)
  • Neurodivergence, for example, attention-deficit/hyperactivity disorder (ADHD), autism spectrum disorder, dyslexia, dyspraxia, other learning disabilities
  • Partial or complete paralysis (any cause)
  • Pulmonary or respiratory conditions, for example, tuberculosis, asthma, emphysema
  • Short stature (dwarfism)
  • Traumatic brain injury
Please check one of the boxes below:

PUBLIC BURDEN STATEMENT: According to the Paperwork Reduction Act of 1995 no persons are required to respond to a collection of information unless such collection displays a valid OMB control number. This survey should take about 5 minutes to complete.

You must enter your name and date
Human Check*